BE549x – Fast Current Source: Up to 20A, one output channel
This series of Magnet Power Supplies are specifically designed to drive Fast Orbit Feed-Back (FOFB) correctors in synchrotrons.
This series of Magnet Power Supplies are specifically designed to drive Fast Orbit Feed-Back (FOFB) correctors in the storage ring of synchrotrons.
Current setting can be updated:
– Either through a RS485 interface for each power supply, up to 14kHz
– Either through the chassis Ethernet port
The current setting can also be the sum of a DC component (sent through Ethernet) and an AC component (through the RS485 interface).
Factory tuning to the magnet electrical parameters allows best noise/speed trade-off.
Thanks to ITEST deep expertise in low-noise analog electronics, this power supply offers very good noise performances to avoid adding unwanted noise to the beam: down to 60ppm peak to peak (10Hz-10kHz).
Exceptional 1.000.000 hours field proven MTBF decreases maintenance costs and suppress the need for redundancy in critical applications, such as particle accelerators.
The best companion to host this module is the BiLT 19” chassis. This 4U-high chassis can be populated with 7 up to 14 current source modules, offering an unrivaled power supply density that will always fit in existing cabinets. The chassis modern and robust Ethernet Controller operates 24/7 for years without fault.
This module series must be customized to the magnet parameters, do not hesitate to contact us.
You will find in the Download section the datasheet of some existing models.
These features are shown for existing products, contact us for better performances.
- Fast Bipolar Current Sources
- Setting up to 14kHz
- 16-bit programming resolution
- Noise down to 60ppm peak-to-peak
- Proven MTBF: 1 million hours